INSULATED HOMES - THE SYSTEM

External Wall Insulation is used on homes such as park homes or solid wall homes that cannot have cavity wall insulation, adding a deep layer of insulation that warms and protects your home.

 

Step One – The Insulation Boards

The key to our system is our 100% recyclable grey Neopor Premium EPS insulation panels. These panels are not the standard white poly boards used by many installers and work in a different way. The boards are made from graphite impregnated polystyrene beads that are fused together using just steam. The graphite improves the thermal efficiency greatly as well as absorbing and reflecting heat. It is also non-toxic as well as being mould and fire resistant. Years ago, we used the cheaper white poly boards but it is important to put a product on that is going to insulate your home well. The difference between white poly and grey poly is like the difference between a cardigan and a thick winter coat. It is not the thickness of the poly that matters, it is how it is made.

 

Remember the better the insulation, the more money you will save on your bills for years and years to come. Our boards do not fit together with tongue and groove as this does not allow for the movement that park homes make and will crack over time. Our boards are fitted independently and the joins sealed with flexible, mould, fire and rodent resistant fire foam. This allows the insulation system to flex with your homes movements.

Step Two – The Render

Straight on to your grey poly boards we’ll trowel on a layer of render into which we’ll place a fibreglass reinforcing mesh. Each join is overlapped by 4 inches for extra strength and we’ll then put another thin coat of render over the mesh. This mesh “sandwhiched” between two layers of render binds the system together, stopping any possible cracking that could form from the natural movement of your home. We also add extra stress panels at areas prone to cracking such as your window and door reveals. We will then leave your home for about a week to allow the render to dry and set hard.

Step Three – The Ultimate Silicone Top Coat

Our unique silicone top coat provides a maintenance-free finish that you will not need to paint every couple of years. Our top coat is a trowelled-on render not a rolled on paint, putting a final thick layer of render, impregnated with the colour of your choice on to your home. It is water repellent and frost resistant to minus sixty degrees and is impregnated with marble granules, one of the hardest stones there is, to form a rock hard, protective coating on your home.

 

Unlike other products such as shell or grit, it can not peel or drop off and unlike PVC or paint finishes it will not split or crack over time. The colour has UV protection built in so will not fade and will continue to provide you with a durable, non-abrasive, maintenance-free finish that only requires a regular wash down to keep clean.​

Our Three-Layer External Wall Insulation System

 

  • Reduces condensation and heat loss
  • Cuts heating bills
  • Protects and prolongs the life of your home
  • Reduce CO2 emissions
  • Improve the appearance of your home

 

The System
Insulated Homes | Exeter Devon

Telephone: 01647 24599

 

Website by GFIVEDESIGN
Insulated Homes Ltd.
Green Deal Installer
IWA Customer Care
NICEIC Logo
QICA Logo
TrustMark Insulated Homes Logo

 

 

  • External wall insulation

  • Double glazed windows & doors

  • Insulated lightweight roofing systems

  • Porches, sun lounges & extensions

  • PVCu soffits, fascia, gutters and downpipes

  • Decking, ramps, paths and steps

Pinterest Social Media Link Icon
Facebook Social Media Link Icon
Twitter Social Media Icon Link

Enter your text here

Enter your text here

Google Plus Social Media Icon
energyefficiencyassociation.co.uk
Community Warmth Logo
Insulated Homes Ltd.
Insulated Homes Ltd.

Telephone: 01647 24599 Email: info@insulatedhomes.net